Solar Irradiance Variability Since 1978

Since November 1978 a set of total solar irradiance (TSI) measurements from space is available, yielding a time series of more than 25 years. Presently, there are three TSI composites available, called PMOD, ACRIM and IRMB, which are all constructed from the same original data, but use different procedures to correct for sensitivity changes. The PMOD composite is the only one which also corrects the early HF data for degradation. The results from the detailed analysis of the VIRGO radiometry allow a good understanding of the effects influencing the long-term behaviour of classical radiometers in space. Thus, a re-analysis of the behaviour of HF/NIMBUS-7 and ACRIM-I/SMM was indicated. For the former the situation is complicated by the fact that there are no in-flight means to determine changes due to exposure to solar radiation by comparison with a less exposed radiometer on the same spacecraft. The geometry and optical property of the cavity of HF is, however, very similar to the PMO6-type radiometers, so the behaviour of the PMO6V radiometers on VIRGO can be used as a model. ACRIM-I had to be revised mainly due to a henceforth undetected early increase and a more detailed analysis of its degradation. The results are not only important for solar radiometry from space, but they also provide a more reliable TSI during cycle 21. The differences between the revised PMOD composite and the ACRIM and IRMB are discussed by comparison with a TSI reconstruction from Kitt-Peak magnetograms. As the PMOD composite is the only one which has reliable data for cycle 21, the behaviour of the three solar cycles can now be compared and the similarities and differences discussed.     

Cf/Al复合材料管件的真空液相成型工艺研究

以高模高强碳纤维M40J(6K)增强铝基复合管为研究对象，研究了真空反压液相浸渗工艺中，纤维束丝分散技术、预制件压缩强度提高技术及碳纤维涂层对管件成型及性能的影响。结果表明：SiCp可以起分散作用，有利于浸渍；加入10％的偏磷酸盐的预制件经680℃真空去胶后的压缩性能满足浸渗要求，纤维保持了较好的平直度且分布均匀。C-Al2O3涂层对复合材料的性能有较大影响，经涂层处理后的预制件所制备出的复合材料的强度比未经涂层处理的提高了13％左右。所制备的复合材料的比强度、比模量较高，密度小于2．5g／cm^3。     

窗函数递推T矩阵法

 引入数字信号处理中的窗函数, 应用于加法定理中, 解决了在入射波为TE 波时, 用递推T 矩阵法计算电大尺寸物体或多个散射体散射场时, 精度不高的问题。另外本文从积分方程出发, 推导出了总体T 矩阵的另一种表示形式, 最后给出的算例证明了引入窗函数的有效性和总体T 矩阵表达式的正确性。     

压气机进口档板动态畸变流场参数分析

对某型发动机压气机进口档板动态畸变流场数据进行了研究。分析了流场稳态总压、总压脉动强度和涡旋尺度随档板插入深度、压气机流量的变化规律,以及各动态参数之间的相对变化特点;初步探讨了涡旋尺度、总压脉动强度、综合畸变指数和压气机喘振裕度损失等性能参数变化的关系,获得了有价值的试验研究数据结果。     

What do Cosmogenic Isotopes Tell us About Past Solar Forcing of Climate?

In paleoclimate studies, cosmogenic isotopes are frequently used as proxy indicators of past variations in solar irradiance on centennial and millennial timescales. These isotopes are spallation products of galactic cosmic rays (GCRs) impacting Earth's atmosphere, which are deposited and stored in terrestrial reservoirs such as ice sheets, ocean sediments and tree trunks. On timescales shorter than the variations in the geomagnetic field, they are modulated by the heliosphere and thus they are, strictly speaking, an index of heliospheric variability rather than one of solar variability. Strong evidence of climate variations associated with the production (as opposed to the deposition) of these isotopes is emerging. This raises a vital question: do cosmic rays have a direct influence on climate or are they a good proxy indicator for another factor that does (such as the total or spectral solar irradiance)? The former possibility raises further questions about the possible growth of air ions generated by cosmic rays into cloud condensation nuclei and/or the modulation of the global thunderstorm electric circuit. The latter possibility requires new understanding about the required relationship between the heliospheric magnetic fields that scatter cosmic rays and the photospheric magnetic fields which modulate solar irradiance.     

进气压力畸变对某三级风扇流场的影响

介绍了在某三级风扇上进行的固定式插板畸变试验，并详细分析了进气压力畸变对进、出口稳态压力和温度的影响。同时，采用频域和幅值域分析方法对脉动压力进行了分析，给出了脉动压力功率谱密度、幅值概率密度和自相关、互相关分析。     

斜齿圆柱齿轮正交法参数优化设计

用正交法对斜齿圆柱齿轮传动进行参数优化设计 ,用方差分析法找出对质量影响最显著的因素 ,最后 ,由信噪比作为指标选出最佳参数组合 ,这是一种快速创新开发产品的设计方法。     

大迎角细长体头涡结构演变的非定常现象研究

细长旋成体绕流中位于尖部附近的一对头涡在迎角增至一定程度时,会表现出很强的非定常特征,而此时后体上为类卡门涡脱落区域。为了寻找这对头涡的非定常特征随迎角变化的规律,在两个风洞中分别用两个细长体模型进行测压和流动显示实验,得到了在很大迎角下旋成体头涡的脉动频率随迎角基本呈线性变化的规律,而后体上的卡门涡脱落频率则与迎角的正弦值成正比。     

一种高亚音速弹用S弯进气道设计及其特性

针对导弹进气道的结构特点，在前人的工作基础上总结出一种适合导弹使用的大偏距、短扩压S弯进气道的设计方法。该方法通过变更中心线、面积规律、唇口形状和喉道位置等参数完成进气道的设计。应用本文中使用的S弯进气道的数学描述方法，可以方便地完成S弯进气道的几何造型工作，实现此类导弹用S弯进气道的参数化设计，生成的造型数据也可以为CFD和CAM使用。此外，作为验证，文中应用此方法设计了一个椭圆进口的S弯进气道，并进行了模型的风洞实验。实验结果表明，使用本文方法设计的弹用S弯进气道可以达到较好的气动性能，能够满足应用需要。     

典型几何和流动参数对高超声速进气道性能的影响

用N-S方程模拟了一系列典型二元高超声速进气道内压缩通道及隔离段模型,模拟发现内压缩通道及隔离段增压比、温升比和总压恢复系数等性能参数主要受面积收缩比、内压缩通道收缩角、隔离段长高比等几何参数以及内压缩通道进口马赫数、密度、附面层厚度等流动参数的影响。内收缩比和内收缩通道收缩角的增大都会使压缩增强;隔离段内沿程平均温升比、马赫数和总压恢复系数曲线则均接近平行直线。内压缩通道进口马赫数的增大也会使压缩增强,但较小的进口马赫数可能引起分离,进而增大增压比;而进口密度增大使附面层变薄,对气流的压缩减弱;进口附面层厚度对沿程平均温升比、增压比以及马赫数的影响近似线性。